1.
Chung-Biau Tsay and Z.H. Fong, 1988, "Characteristic
Study of Helical Gears with Pinion Circular Arc Teeth
and Gear Involute Teeth," Journal of the Chinese
Society of Mechanical Engineers, Vol. 9, No. 3, pp.
199-206. (EI)
2. Chung-Biau Tsay and
Z.H. Fong, 1989, "Tooth Contact Analysis for Helical
Gears with Pinion Circular Arc Teeth and Gear Involute
Shaped Teeth," Trans. of ASME, Journal of Mechanism,
Transmissions, and Automation in Design, Vol. 111, No.
2, pp. 278-284. (SCI, EI)
3. Chung-Biau Tsay, Z.H.
Fong and Sue Tao, 1989 "The Mathematical Model of
Wildhaber- Novikov Gears Applicable to Finite Element
Stress Analysis," Mathematical and Computer Modelling,
Vol. 12, No. 8, pp. 939-946.(SCI)
4. Z.H. Fong and Chung-Biau
Tsay, 1990, "Tooth Contact Analysis of Spiral Bevel
Gears," Journal of the Chinese Society of Mechanical
Engineers, Vol. 11, No. 6, pp. 538-544.(EI)
5. Chung-Biau Tsay and
Z.H. Fong, 1991, "Computer Simulation and Stress
Analysis of Helical Gears with Pinion Circular Arc Teeth
and Gear Involute Teeth," Mechanism and Machine Theory,
Vol. 26, No. 2, pp. 145-154 .(SCI, EI)
6. Z.H. Fong and Chung-Biau
Tsay, June 1991, "A Mathematical Model for the Tooth
Geometry of Circular-Cut Spiral Bevel Gears," Trans.
of ASME, Journal of Mechanical Design, Vol. 113, pp. 174-181.(SCI,
EI)
7. Z.H. Fong and Chung-Biau
Tsay, September 1991, "A Study on the Tooth Geometry
and Cutting Machine Mechanisms of Spiral Bevel Gears,"
Trans. of ASME, Journal of Mechanical Design, Vol. 113,
pp. 346-351 .(SCI, EI)
8. Z.H. Fong and Chung-Biau
Tsay, June 1992, "The Undercutting of Circular-Cut
Spiral Bevel Gears," Trans. of ASME, Journal of Mechanical
Design, Vol. 114, pp. 317-325 .(SCI, EI)
9. Z.H. Fong and Chung-Biau
Tsay, September, 1992, "Kinematical Optimization
of the Spiral Bevel Gears," Trans. of ASME, Journal
of Mechanical Design, Vol. 114, pp. 498-506 .(SCI, EI)
10. Hou Y.C., S.H. Su,
C.H. Tseng, and Z.H. Fong, 1996, "An efficient Optimum
Design Procedure for Bicycle Rear Derailleurs," International
Journal of Vechicle Design, Vol. 17, No. 4, pp. 483-502.
國科會計畫編號NSC 82-0401-E009-085.(EI)
11. Wang, C.C., C.H.
Tseng, and Z.H. Fong, 1996, "A Method for Improving
Bicycle Shifting Performance," International Journal
of Vehicle Design, Vol. 17, No. 5, pp. 100~117, 1996.
國科會計畫編號NSC 83-0401-E009-102.(EI)
12. Hou, Y.C., S.H. Su,
C.H. Tseng, Z.H. Fong, 1996,”A Systematic Optimum Design
Procedure for Bicycle Rear Derailleurs,” Accepted to Journal
of Applied Mechanisms and Robotics, (EI)
13. Chung-Yunn Lin, Chung-Biau
Tsay, and Zhang-Hua Fong, 1996, "Tooth Contact Analysis
of Hypoid Gears," Journal of the Chinese Society
of Mechanical Engineers, Vol. 17, No. 3, pp.241~249,(EI)
14. Chung-Yunn Lin, Chung-Biau
Tsay, and Zhang-Hua Fong, 1996,"Contact Pattern Development
of Spiral Bevel and Hypoid Gears by Applying Optimization
Techniques," Journal of the Chinese Society of Mechanical
Engineers, Vol. 17, No. 5, pp.413~424. (EI)
15. Chung-Yunn Lin, Chung-Biau
Tsay, and Zhang-Hua Fong, 1997, "Mathematical Model
of Spiral Bevel and Hypoid Gears Manufactured by the Modified
Roll Method," Mechanism and Machine Theory, Vol 32,
No.2, pp. 121-136. (SCI, EI)
16. Chung-Yunn Lin, Chung-Biau
Tsay, and Zhang-Hua Fong, Aug. 1998, "Computer-Aided
Manufacturing of Spiral Bevel and Hypoid Gears with Minimum
Surface Deviation," Mechanism and Machine Theory,
Vol. 33, No. 6, pp. 785-803. (SCI, EI)
17. T.Y. Lin, C.H. Tseng,
and Z.H. Fong, 1998, “An Experimental Approach Characterizing
Rear Bicycle Derailleur Systems Part II: the Stability
Region and its Applications,” Int. J. of Vehicle Design,
Vol. 19, No.3, pp.371~384. (EI)
18. Zhang-Hua Fong, “Mathematical
Model of Universal Hypoid Generator with Supplemental
Kinematic Flank Correction Motions,” Journal of Mechanical
Design, Transactions of the ASME, V 122, n1, Mar, 2000,
p 136-142.
19. Lin, Chung-Yunn,
Tsay, Chung-Biau, and Fong, Zhang-Hua, July 4, 2001, “Computer-aided
manufacturing of spiral bevel and hypoid gears by applying
optimization techniques,” Journal of Materials Processing
Technology, Vol. 114, Issue 1, pp. 22-35
20. Zhang-Hua Fong, and
Chieh-Wen Tsay, “Study on the Undercutting of Internal
Cycloidal Gear with Small Tooth Difference,” Journal of
the Chinese Society of Mechanical Engineers, Vol. 21,
No. 4, 2000, pp. 359-367. (EI)
21. Zhang-Hua Fong, Ta-Wei
Chiang, and Chieh-Wen Tsay, September, 2002, “Mathematical
Model for Parametric Tooth Profile of Spur Gear Using
Line of Action,” Mathematical and Computer Modeling, Volume:
36, Issue: 4-5, pp. 603-614.
22. Jeng-Kang Lee, Chao-Kuang
Chen, and Zhang-Hua Fong, “Mathematical Model of Curvature
Analysis for Conjugate Surfaces with Generalized Motion
in Three Dimensions,” Journal of Mechanical Engineering
Science , v215, pp487-502 2002.(EI, SCI)
23. Zhang-Hua Fong, F.C.
Huang, and H.S. Fang, “Evaluating the Inter-lobe Clearance
of Twin-Screw Compressor by the Iso-Clearance Contour
Diagram (ICCD),” Mechanism and Machine Theory(SCI), Vol.
36, pp. 725-742, 2001.
24. Chung-Yunn Lina,
Chung-Biau Tsaya, and Zhang-Hua Fong , “Computer-aided
manufacturing of spiral bevel and hypoid gears with minimum
surface-deviation,” Mechanism and Machine Theory, Volume
33, Issue 6 , August 1998, Pages 785-803.
25. P-Y Wang, Z-H Fong,
and F-S Fang, “Design Constraints of Five-Arc Roots Vacuum
Pumps,” Journal of Mechanical Engineering Science, v216,
p225-234 2002.
國外會議論文
1.
Chung-Biau Tsay and Z.H. Fong, Dec. 1987, "Tooth
Contact Analysis for Helical Gears with Pinion Circular
Arc Teeth and Gear Involute Shaped Teeth," 4th
Conf. of CSME, pp. 1147-1153.
2. Chung-Biau Tsay, Z.H.
Fong, and Sue Tao, Dec. 1988, "Finite Element Stress
Analysis of Wildhaber-Novikov Gears," 5th Conf. of
CSME, pp. 1261-1268, Dec. 1988.
3. Z.H. Fong and Chung-Biau
Tsay, Nov. 1990, "Tooth Contact Analysis of Spiral
Bevel Gears," 7th Nat. Conf. of CSME, pp. 1713-1720.
4. Z.H. Fong and Chung-Biau
Tsay, Nov. 1990, "A Study on the Undercutting of
Circular-Cut Spiral Bevel Gears," 1990 NSC-NSF Joint
Seminar on recent Development in Mechanical Design, pp.
193-202.
5. Z.H. Fong and Chuck
S.D. Chen, Nov. 1992, "Mathematical Model of Spiral
Bevel and Hypoid Gears Manufactured by the Modified Roll
Method," 9th Conf. of CSME .
6. Zhang-Hua Fong, and
R.H. Hsu, “Topographic Error Analysis of Gear Plunge-Shaving
Cutter Finished by Cone Grinding Wheel,” submitted to
Computer Methods in Applied Mechanics and Engineering.
7. Pei-Yu Wang and Zhang-Hua
Fong, “Mathematical Transformation of Machine Settings
from Cradle-type Hypoid Generator to Cartesian-type Hypoid
Generator,” submitted to Journal of Materials Processing
Technology.
8. Ming-Feng Tsay, and
Zhang-Hua Fong, “Study on the Generalized Mathematical
Model of Non-Circular Gears,” submitted to Mathematical
and Computer Modelling.
9. Pei-Yu Wang, Zhao-Xin
Wu and Zhang-Hua Fong, “Tooth profile Design Methodology
of the Twin-Screw Compressor Based on the Shape of Sealing
Line,” submitted to Mechanism and Machine Theory.
10. Pei-Yu Wang, and
Zhang-Hua Fong, “Adjustability Improvement of Face-Milling
Spiral Bevel Gears by Modified Radial Motion (MRM) Method,”
submitted to Mechanism and Machine Theory.
11. Pei-Yu Wang, and
Zhang-Hua Fong, “Forth Order Kinematic Synthesis for Face-Milling
Spiral Bevel Gears with Modified Radial Motion (MRM) Correction,”
submitted to Journal of Mechanical Design.
12. C.C. Wang, Y.C. Hou,
C.H. Tseng, and Z.H. Fong, 1997, “Design Optimization
and Applications in Bicycle Derailleur Systems,” MCnu
97.
13. Zhang-Hua Fong, and
Pei-Yu Wang, June 20-24, 1999, “Study on the Tooth Profile
of the Multi-lobed Root’s Pump,” IFTomm, Tenth World Congress
on the Theory of Machines and Mechanisms, Vol. 6, pp.
2392-2405, Oulu, Finland.
國內會議論文
1. C.C. Wang, C.H. Tsaeng,
and Z.H. Fong, 民國83年11月, "Optimum Design for Sprocket
Shape of the Freewheel on Bicycles," 中國機械工程學會第十一屆學術研討會，第129~
138頁，台中市。
2. Z.H. Fong, and C.W.
Tsay, “Study on the Undercutting of Internal Cycloidal
Gear with Small Tooth Difference,” 中國機械工程學會第十六屆學術研討會，第592-599頁，新竹市。
